| 01250 872 261

Ground Gas Accessories

Ground Gas Accessories

Both the British Standard BS8485:2015 and the CIRIA C735 guidance document emphasise the importance of on site verification to ensure design performance targets for gas membrane systems are met.

In order to achieve this, good installation and site practices are increasingly important. To assist contractors in meeting the strict guidance given in the most recent standards documents, the A Proctor Group supplies a wide range of membrane accessories to ensure the installation process is both simple and robust.

New Ground Accessories Brochure

Our new Ground Gas Protection Accessories Brochure is now available. Download it for complete information on our range of Protech and Provoid Ground Gas accessories.Download Brochure
 

Protech GM Flashing

Ground Gas Accessory

Protech GM Flashing Strip is a waterproof and gas resistant tape protected by an aluminium film and reinforced with a polyester film. Used for detailing stanchions, corners, penetrations and repairs.

 Download Datasheet

Protech GR DPC

Ground Gas Accessory

Protech GR-DPC is a gas resistant DPC used through junctions with cavities or masonry to protect against the ingress of gas and damp.

 Download Datasheet

Protech GM Protection Fleece

Ground Gas Accessory

Protech GM Protection Fleece used to protect the integrity of the Protech Gas Membranes from follow on trades or from sharp protrusions in made ground.

 Download Datasheet

Protech SAGM

Ground Gas Accessory

Protech SAGM is a self adhesive gas and waterproofing membrane for use in detailing and vertical installation applications.

 Download Datasheet

Protech GM Primer

Ground Gas Accessory

Protech GM Primer is used in conjunction with Protech SAGM and Protech GM Flashing in order to consolidate the substrate and ensure complete bond development.

 Download Datasheet

Protech Protection Board

Ground Gas Accessory

Protech Protection Board used to protect the integrity of the Protech Gas Membranes mainly in vertical applications.

 Download Datasheet

Protech GM Tape

Ground Gas Accessory

Protech GM Tape is used to seal overlaps in gas membranes and accessories, and also below timber sole plates.

 Download Datasheet

Protech TF Tape

Ground Gas Accessory

Protech TF Tape is an extruded tape designed for use on timber frame constructions.

 Download Datasheet

Protech LAGM

Ground Gas Accessory

Protech LAGM * (Liquid Applied Gas Membranes) is used in areas of vertical applications or in hard to treat areas.

 Download Datasheet

Protech GM Super Starter Band

Ground Gas Accessory

Protech GM Super Starter Band has a dual function to provide a continuous barrier to gas which is then linked in with the horizontal Protech GM Super Membrane. Protech GM Super Starter Band crosses the cavity to prevent ingress of gas

 Download Datasheet

Protech VOC Flex StarterBand

Ground Gas Accessory

Protech VOC Flex Starter Band has a dual function to provide a continuous barrier to gas which is then linked in with the horizontal Protech VOC Flex Membrane. Protech VOC Flex Starter Band crosses the cavity to prevent ingress of gas.

 Download Datasheet

Protech GM + Starter Band

Ground Gas Accessory

Protech GM+ Starter Band has a dual function to provide a continuous barrier to gas which is then linked in with the horizontal Protech GM+ Membrane. Protech GM+ Starter Band crosses the cavity to prevent ingress of gas

 Download Datasheet

Protech GM Corners

Ground Gas Accessory

Protech GM Internal & External Corners are recommended to achieve a gas tight seal and as technically a better solution. Corners available to suit all Protech gas membranes. Alternative sizes available on request.

 Download Datasheet

Protech GM Top Hats

Ground Gas Accessory

Protech GM Tophats are used to detail around pipe penetrations. Tophats available to suit all Protech gas membranes. To be used in conjunction with Protech GM Flashing 150mm (A31210 / A31211).

 Download Brochure

Protech Tool Box

Ground Gas Accessory

Starter Toolbox for detailing gas membranes.Each box includes: • 45mm Silicone Seam roller • 6mm Brass Penny Roller • Heavy Duty Scissors • 5m Tape Measure • Permanent Marker Pen

 Download Brochure

Provoid Gully Vent Boxes

Ground Gas Accessory

Provoid Gully Vent Boxes are an integral part of the Provoid Gas Venting System to act as inlets and outlets.

 Download Datasheet

Provoid Ground Level Gas Vent Box

Ground Gas Accessory

Provoid Ground Level Vent Boxes* are an integral part of the Provoid Gas Venting System to act as inlets and outlets.

 Download Datasheet

Provoid Flat T Periscopic Connector

Ground Gas Accessory

Provoid Flat T Periscopic Connectors* are used to connect the Provoid Gas Vent System to the Provoid Telescopic Vents.

 Download Brochure

Provoid BTB Connectors 900MM Open

Ground Gas Accessory

Provoid BTB Connectors* (Open) are used to provide a carrier to transmit going through dwarf walls.

 Download Brochure

Provoid BTB Connectors 900MM Closed

Ground Gas Accessory

Provoid BTB Connectors* (Closed) are used to provide a carrier to transmit going through dwarf walls.

 Download Brochure

Provoid Solid Collection Pipe

Ground Gas Accessory

Provoid Solid Collection Pipe is used to connect the Provoid T Connectors to assist the Provoid Strip Formation System in the dilution of potential gases under the slab.

 Download Brochure

Provoid Flat T Gully Connector

Ground Gas Accessory

Provoid Flat T Gully Connectors are used to connect the Provoid Gas Vent System to the Provoid Gully and Ground Level Gas Vent Box.

 Download Brochure

End Caps for Provoid T Connectors

Ground Gas Accessory

End Caps are used to close off Provoid T Connectors

 Download Brochure

Provoid T Connectors

Ground Gas Accessory

Provoid T Connectors* (closed) are used to connect the Provoid Gas Vent System to the inlets and outlets. Includes 2 x 110mm diameter cap ends.

 Download Brochure

Provoid Slotted Collection Pipe

Ground Gas Accessory

Provoid Slotted Collection Pipe* is used to connect the Provoid T Connectors to assist the Provoid Blanket Formation System in the dilution of potential gases under slab.

 Download Brochure

Provoid Gas Venting Bollards

Ground Gas Accessory

Provoid Gas Venting Bollards* – are an integral part of the Provoid Gas Venting System to act as inlets and outlets.

 Download Brochure

Provoid Gas Venting Stacks

Ground Gas Accessory

Provoid Gas Venting Stacks* – are an integral part of the Provoid Gas Venting System to act as inlets and outlets when high level ventilation is required.

 Download Brochure

Provoid Horizontal Adaptor

Ground Gas Accessory

Provoid Horizontal Adaptor* allows a connection from the Provoid Periscopic Vent to the Provoid T Connectors for ventilation under the slab.

 Download Brochure

Provoid Vertical Adaptor

Ground Gas Accessory

Provoid Vertical Adaptors* are 1m long sleeve to vertically extend the Provoid Periscopic Vent

 Download Brochure

Provoid Pericscopic Vent Including Air Brick (Terrecota)

Ground Gas Accessory

Provoid Periscopic Vents* are an integral part of the Provoid Gas Venting System to act as inlets and outlets.

 Download Brochure

Radon Sump Unit

Ground Gas Accessory

Radon is a radioactive gas.The Protech Radon Sump Unit provides a permanent extraction point under the ground floor, creating a low pressure area under the building.

 Download Brochure

Latest News

Contact Us

  8:30am - 5pm, Mon - Fri

  01250 872 261

  01250 872 727

  

  A. Proctor Group Ltd., The Haugh, Blairgowrie, PH10 7ER

 

Testimonials

APG-LOGO

 

Innovative Construction Products for Over 80 Years.