"Ease of ordering, technical support, ease of installation, no roof ventilation required in most circumstances, high strength of the material resists damage through foot traffic, no wind generated noise & the peace of mind knowing that we are not likely to get complaints of condensation problems from our customers."
Some of the highest performing technically advanced thermal membrane products have been supplied by the A. Proctor Group Ltd for a new build student accommodation project in the Scottish highlands.
The project consists of a 40-bed student accommodation development in the Sutherland village of Dornoch, and is part of a wider programme by the University of the Highlands & Islands (UHI). A key factor in the design by the architects 360 Architecture was ensuring that the materials chosen required little or no maintenance, and that the building continues to enhance its setting over the course of its lifetime.
The buildings were constructed using Val-U-Therm® a unique closed panel, factory insulated timber frame system with class leading thermal performance and manufactured off-site by Scotframe Timber Engineering. The Val-U-Therm® wall, roof and floor systems in combination with the high performance breather membranes from the A. Proctor Group give the finished structure outstanding thermal efficiency.
As we look to create buildings which are better insulated, more airtight and more energy efficient, taking the management of moisture into account in the design process becomes more critical. Roofshield pitched roof underlay, which is both air and vapour permeable, was chosen for the roof because it has an extremely high degree of vapour permeability, as well as air permeability, so will still perform in conditions in which air tight alternatives will not.
As part of the construction Scotframe chose Reflectashield TF 0.81, a vapour permeable low emissivity membrane for use externally on timber frame buildings, and Reflectatherm Plus a reflective, high resistance vapour barrier for internal walls, ceilings and floors, designed to enhance the thermal performance when placed on the warm side of the insulation. The introduction of Reflectashield and Reflectatherm Plus restricts the passage of water vapour, and enhances the energy performance of the building envelope. It has long been recognised that the correct management of moisture vapour within buildings is an important aspect of ensuring the longevity of not only the building fabric, but also the health of the occupants.
The student accommodation also benefits from enhanced acoustic performance with the introduction of a high quality floating floor solution. The Profloor Dynamic Batten System from the A. Proctor Group provides excellent levels of impact and airborne sound insulation. The unique dual foam structure of the battens provides effective isolation of the floor finish from the structure, reducing impact sound transmission, whilst at the same time enabling minor irregularities in the surface of the sub-floor to be addressed.